1HTKer9gaESugAXgiVGxALVdg8Gec11UjV (3065) ·
I wonder if this rocket will also use invisible propulsion when leaving the Moon like Apolo did
#fakespace
https://twetch.app/t/4b12d4fe08c86297869cb444800152ff9b241db0092f6de5d2f6b071fe06cdea
Replies
15AMMcYyWaje9wV4kCvdhzfrUbNM9TeM5W (228) ·
Lunar Ascent Engine
"Pressure-fed, 3,500 pounds of force vacuum, a 310 specific impulse (Isp), & hypergolic propellants. "
https://ntrs.nasa.gov/citations/20100027321
The lander was a tin can pushed off the moon.
#realspace
https://youtu.be/9HQfauGJaTs
1HTKer9gaESugAXgiVGxALVdg8Gec11UjV (3065) ·
Thanks for illustrating my point. That is exactly what I was refering to. Invisible propellant.
1Mg2Zb2VbidHmJh9ZEXLaYKGndVEierdWt (1752) ·
Who is controlling the camera? 🤔
15AMMcYyWaje9wV4kCvdhzfrUbNM9TeM5W (228) ·
The guy they left behind.
👨🚀
It was controlled by pre-set commands based on trajectory sent from Earth to high-gain antenna on the rover.
It failed on Apollo 15, they set it too close on Apollo 16 missing most of it & they nailed it on Apollo 17.
1Dx8ibNyCBoHEzjVPShA3hBVoYNztb42HZ (2781) ·
They left it their from the apollo mission. It has Energizer batteries. They were waiting and waiting.
1Mg2Zb2VbidHmJh9ZEXLaYKGndVEierdWt (1752) ·
That would be about a 3-4 second delay. There is no delay on the camera zooming out and tilting up.
15AMMcYyWaje9wV4kCvdhzfrUbNM9TeM5W (228) ·
Yep, 3 second delay.
Ed Fendall sent the commands.
"I actually sent the first command at liftoff minus three seconds. And each command was scripted, and all I was doing was looking at a clock, sending commands. I was not looking at the television."
1Mg2Zb2VbidHmJh9ZEXLaYKGndVEierdWt (1752) ·
🤣
1Dx8ibNyCBoHEzjVPShA3hBVoYNztb42HZ (2781) ·
The sheeple would believe its hypoallergenic propellants. Lol.
1HTKer9gaESugAXgiVGxALVdg8Gec11UjV (3065) ·
So how come the hypergolic propellant is not visible 0:10 - 0:20 when it burns here with strong light? https://www.youtube.com/watch?v=cPAZp1wM2C8
15AMMcYyWaje9wV4kCvdhzfrUbNM9TeM5W (228) ·
This video is on Earth, lots of oxygen around to make flame.
The moon is low gravity in a near vacuum, the propellants are in the lander, not the orbiter. They explode, release pressure, push the orbiter up.
You see it happen in the video.
15AMMcYyWaje9wV4kCvdhzfrUbNM9TeM5W (228) ·
The astronauts leaving the moon are not in a rocket ship.
The module just needs to be pushed out of the influence of the Moons low gravity. The mixture of propellants burst quickly inside the lander, pressure forms and pops the module up & away.
1NUTqCvXfR6ax88gQsKLvXT6JiQrWY5LRb (2353) ·
That "model" did not land on the moon... it's TV trickery
If you believe apollo went to the moon 6 times in the 70's, I got an invisible tendie to sell ya.
Only way man goes to another world is electro gravitic propulsion.
1NUTqCvXfR6ax88gQsKLvXT6JiQrWY5LRb (2353) ·
Hey honey, check out my spaceship I made after work...
Zoom in, its … garbage, slapped together. But on a 1970 12 inch dog … monitor it looks amazing.
15AMMcYyWaje9wV4kCvdhzfrUbNM9TeM5W (228) ·
It's literally the most documented event in history and pretty much every file they produced is available to read in the NASA archives if you really want your questions answered on how it was done.
🤷♂️
15AMMcYyWaje9wV4kCvdhzfrUbNM9TeM5W (228) ·
Why do you think that?
You can find all the plans and diagrams for the module if you really want to understand it or build your own.
It looks that way because they didn't waste weight adding body panels.
Strip the panels off your car for a clue.
1HTKer9gaESugAXgiVGxALVdg8Gec11UjV (3065) ·
These are not good arguments. There is oxygen in the propellant. The exhaust at such high temperature should be somewhat visible, especially against the complete darkness of space.
1HTKer9gaESugAXgiVGxALVdg8Gec11UjV (3065) ·
Second, combustion is not perfect and even such propellants (aerozine 50 + nitrogen tetroxide) should show some flame. But, alas, no visible flame at all.
1HTKer9gaESugAXgiVGxALVdg8Gec11UjV (3065) ·
Yeah right, the archive has literally been found lost or was burnt down last year.